Rear Upper Adjustable Tubular Control Arms Part #TBC-47 (1964-1967)
Rear Suspension Components Rear Upper Adjustable Tubular Control Arms Part #TBC-47 (1964-1967)
Available for
1964-67 Chevelle, El Camino, Malibu, Monte Carlo, Skylark, Special, Grand Sport, Sport Wagon, F-85, Cutlass, 442
Our rear adjustable control arms make setting pinion angle easy. the control arm is designed with right and left-hand threads on the adjuster so the arm does not have to be removed in order to adjust the length. Jam nuts secure the position after adjustment. Adjustable upper arms are required if you are installing a nine inch Ford rear end.
High misalignment spherical bearings are located on the frame side allowing the rear end to have proper movement. The rear end upper pivot mounts, for street and handling applications, should use rubber bushings. Note: if you use polyurethane bushings on the rear end upper mounts, the rear end will go into bind at the outer limits of travel. Rubber will allow for any additional movement required. https://www.globalwest.net1964-1965-1966-1967-abody-chevelle-elcamino-malibu-cutlass-montecarlo-rear-lower-trailing-arms.html $287.96
Available for
1964-67 Chevelle, El Camino, Malibu, Monte Carlo, Skylark, Special, Grand Sport, Sport Wagon, F-85, Cutlass, 442
Our rear adjustable control arms make setting pinion angle easy. the control arm is designed with right and left-hand threads on the adjuster so the arm does not have to be removed in order to adjust the length. Jam nuts secure the position after adjustment. Adjustable upper arms are required if you are installing a nine inch Ford rear end.
High misalignment spherical bearings are located on the frame side allowing the rear end to have proper movement. The rear end upper pivot mounts, for street and handling applications, should use rubber bushings. Note: if you use polyurethane bushings on the rear end upper mounts, the rear end will go into bind at the outer limits of travel. Rubber will allow for any additional movement required.
Rear Upper Adjustable Tubular Control Arms Part #TBC-47 (1964-1967)
Product Description
Available for
1964-67 Chevelle, El Camino, Malibu, Monte Carlo, Skylark, Special, Grand Sport, Sport Wagon, F-85, Cutlass, 442
Our rear adjustable control arms make setting pinion angle easy. the control arm is designed with right and left-hand threads on the adjuster so the arm does not have to be removed in order to adjust the length. Jam nuts secure the position after adjustment. Adjustable upper arms are required if you are installing a nine inch Ford rear end.
High misalignment spherical bearings are located on the frame side allowing the rear end to have proper movement. The rear end upper pivot mounts, for street and handling applications, should use rubber bushings. Note: if you use polyurethane bushings on the rear end upper mounts, the rear end will go into bind at the outer limits of travel. Rubber will allow for any additional movement required.