1958-1964 GM Impala Biscayne Front 1″ Sway Bar Part Number: SB-706

Description

Global West offers the biggest front sway bar you can install on a 1958, 1959, 1960, 1961, 1962, 1963, 1964 Impala in the stock location without running into major installation problems. The sway bar kit comes with bushings, end links and hardware. The factory sway bar is relatively small for the Impala, so adding this sway bar will be noticed. The sway bar will reduce some of the  body roll as the car goes around turns. This will improve handling but to really help the body roll a set of front spring would be in order. S-83 springs for small block and S-84 for big block.   These springs have a slightly higher spring rate than factory and will reduce body roll but most important they will also get rid of the pogo affect when the car goes over bumps. The pogo affect is when the car goes over bump and then oscillates back and forth before it settles down. You would think this a shock problem but in this case the real fix is changing the front spring rate.

The springs will lower the car approximately one inch for small block or big block.