1970-1977 Mavrick QA1 Single Adjustable Front End Coilover Kit for Street or Drag Applications running a Big Block Part Number: COMST-7077TBS

Description

Front End Coilover Big Block Kit. Using QA-1 Single Adjustable Shocks.

Available for:

• 1970 -77 Mavrick

COIL-OVER PARTICULARS-

* Global West offers 2 different coilover suspension systems. The first is used for drag racing and street applications. The second system is a Negative roll system. Negative roll is used for road racing and performance street handing.

* Global West coilover kits maintain factory suspension loads in the shock tower, from the bottom up.

* No cutting of the shock tower is required.

* Installation requires drilling a total of 6 holes for the drag / street version and 10 holes for negative roll / road racing system. Drill templates included.

* Upper and lower control arms are fully assembled. Top of the line Del-a-lum bushings are used in the upper arms and spherical Teflon lined bearings are used in the lowers. Threaded ball joints are used top and bottom.

* Adjustable strut rods make caster adjustment simple. Our strut rods have a special clevis that indexes in the frame making it impossible for improper installation.

* Eccentric loc-out kits eliminate the lower cam bolts. The cam bolts can slip during hard cornering altering your alignment. Our new loc-out kits offer 6 adjustments for camber rather then one.

* Stock brakes whether drum or disc can be used. Racing brakes are also not a problem. Notice our category 5 disc brake system.

* Adjustable ride height is a given. Note: Lowering the ride height 1 inch places the shock in the middle of its travel.

* Billet aluminum upper mounts are standard.

* Special steel lower mounts install on the lower arm to maximize spring and shock performance.

* Needle bearing kits are standard with our coilover kits. Needle bearings go between the lower adjuster and the spring. Needle bearings to reduce drag when adjusting ride height.

* Hardware is included along with instructions and alignment specifications.

Handling and drag racing kits are available, both kits include the following components. Note: All components are shipped powder coated black.

* Tubular upper control arms
* Tubular lower control arms
* Adjustable strut rods
* Billet aluminum tower shock mounts
* Steel lower shock mounts
* Viking performance shocks (double adjustable)
* QA-1 West Springs
* Helper springs
* Helper spring spacers
* Thrust bearing kit under the springs for easier adjusting
* Inner Shock Tower Supports
* New hardware