655 South Lincoln Ave / San Bernardino Ca. 92408
Phone: Toll Free 1-877-470-2975
Fax: 909-890-0703

Lowering the front of  your car or setting corner weights can easily be adjusted by using Kit CO-32S for street or CO-32SR for road racing. The kits are designed to install on any replacement shock that does not already have a threaded shock body. The upper spring mount is unique to this kit  because it simulates the exact load a stock coil spring places on the upper mount. This reduces any chance of premature wear on the upper mount. Thrust bearings are used between the spring and adjuster, making setting ride height a bit easier.

The difference between the two kits offered is the spring rate. S stands for street application and SR refers to Road Racing.

Either kit includes the following:

• 2 coil springs
• 2 threaded collars
• 2 adjuster nuts
• 2 adjuster jam nuts
• 2 thrust bearings
• 2 shock washers
• 2 special upper spring mounts
• 1 spanner wrench

• Allows ride height adjustment up or down.
  (Over 4-inches total adjustment)
• Coil over kit fits stock or other replacement front shocks .
• Adjusting collars use buttress threads. This type of thread is widely used in the aircraft industry.
• Springs perches maintain their settings utilizing a heavy duty jam ring.
• Upper spring perch places the load on the factory spring mount in the
  same manner as the factory spring did.

Part# CO-32SR with Road Racing springs $387.05 one kit per car
Part# CO-32S with Street Performance springs $359.95 one kit per car
(Note: Both kits will not work with stock springs.)
Return to 1982-02 Camaro-Firebird home page.

Return to Global West Home page.