1993-02 Camaro-Firebird front tubular upper control arm

Global West has developed a tubular upper control arm kit

for 93-02 Camaro and Firebird applications. There are two control arm kits available. The arms are the same other then the bushings used. The first uses a Del-a-lum bushing while the 2nd type uses Delrin, a hard plastic. Both bushing designs use grease fittings for easy bushing lubrication and both bushing designs channel grease through out the bushing when lubricated. The control arms are redesigned from stock geometry in order to give the vehicle more straight line stability and greater cornering response. The control arms are a direct bolt in replacement for the stock mounts. They are powder coated black, come complete with ball joint, and shipped assembled.

Benefits and Features:

Direct replacement for upper arms.

Upper arm provides more negative camber for improved tire life and cornering.

Increased caster provides straight line stability and greater cornering ability.

Upper ball joint angles are corrected.

Two types of upper bushings are available: DEL-A-LUM bushings. which offer a limited life time
warranty or hard plastic bushing that has no warranty. Both do the job, however
Del-a-lum lasts several years longer. We do not recommend polyurethane in this location.

Upper control arm bushings use grease fitting for easy bushing lubrication.

Control arms come with bushings installed.

Ball joints are included.

New Alignment specs included.

1. Tubular Upper control arm kit Part# CTA 32A --- uses top of the line Del-a-lum bushings-- Del-a-lum bushings have a warrantee for as long as you own your car. the control arm is used for street, autocross, and road racing.
Part # CTA-32A ---$314.52 a pair Overstock item $272.50 pr

Tubular Upper control arm Kit Part kit# CTA 32 --- uses a delrin bushing. This arm is used for drag racing and autocross. The bushings in this arm do not have a warranty.
Part # CTA-32 ---$227.64 a pair Overstock Item $199.00 pr

Return to Camaro/Firebird home page.