655 South Lincoln Ave San Bernardino Ca. 92408
Toll Free 877-470-2975 Fax 909-890-0703

We offer several types of bushings: rubber, polyurethane, brass, and Del-a-lum (pronounced della-loom). Unquestionably Del-a-lum bushings are the Top of the line when it comes to suspension control and longevity. They will out last all the other bushings. In fact Del-a-lum bushings have a life time warranty to the original purchaser. No other bushing has a warranty of that kind. These bushings are approved for all NHRA applications and are excellent for street, road race, and dirt track applications.

For more information about Del-a-lum bushings go to What is a Del-a-Lum ????

Billet cross shafts and offset shafts:

We manufacture two styles of cross shafts, offset and standard. Both shafts may be used in stock or tubular control arms. The shafts are Gold Zinc finish and hardware is supplied with each shaft. All shafts will except standard rubber, poly, or our Del-a-lum bushings.

Offset Upper control arm shafts are used to obtain more latitude for alignment settings. These shafts are a good investment if you are using stock upper control arms.

Note: Our tubular control arms do not require offset shafts. We designed the control arms with improved geometry. Installing them automatically gives you our new performance curve.

The following chart lists Del-a-lum upper arm bushings, lower control arms bushings, and upper control arm shafts.

Tubular tie rod adjusting sleeves.

Tubular tie rod adjusting sleeves provide full thread engagement versus the factory split sleeve.
We recommend using full thread engagement anytime a vehicle is going to be used for performance
applications.
(Jam nuts are provided with tubular tie rod adjusting sleeves).

Return to 70-81 Camaro/Firebird home page.