655 South Lincoln Ave / San Bernardino Ca. 92408

Phone: Toll Free 1-877-470-2975
 

Sway bars Front and Rear:

 A little information about sway bars.

The biggest mistake most people make is put massive sway bars on the front and rear. Sway bars
are supposed to compliment the suspension, NOT dominate it. Proper spring selection would be a
much smarter move versus massive sway bars. Some of the problems you will encounter with
oversize sway bars are lifting the inside tire during hard cornering, instability over rough roads, corner
entry under steer, corner exit oversteer, sway bar end link breakage plus a number of other conditions.

This is all created over the roll stiffness being to high because of a oversize sway bar.

 

Bigger is not always better.

The following sway bars are recommended sizes to use with stock or performance springs. We do not recommend using a 1-1/4 inch front bar with our Global West springs and
Negative Roll Systems.
(see Handling Charts for proper combinations)

All A-bodies front
Part# SB-883 --- 1-1/8 inch diameter $199.95
Part# SB-709 --- 1-1/4 inch diameter $215.39

Polyurethane end links and sway bar to frame bushings are included.

Rear sway bars

Part # SB690 ---- 1 inch diameter $199.95
Part # SB692 ------ 7/8 diameter $199.95

Return to 1964-72 A-body home page.