655
South Lincoln Ave / San Bernardino Ca. 92408 |
655
South Lincoln Ave / San Bernardino Ca. 92408 |
1955 -1957 Chevy
|
Global West's new G-plus upper and lower control arms provide straight
line stability and improved corner entry due to new geometry. The control
arms are shipped pre-assembled with factory replacement ball joints,
billet cross shafts, Del-a-lum bushings, bump stops, and a complete
set of instructions including new alignment specifications. Upper control arms simply bolt into position. The arm is structured to provide clearance for the brake lines and inner fender well. Preliminary alignment setup while installing the upper arms will be using 2 (1/8 inch alignment shims) on each bolt. The alignment shop will finish the rest. Upper and lower control arms are powder coated black and the special billet cross shafts are gold zinc.
The lower control arms are designed specifically so that the stock power steering components will not interfere with the shaft of the lower control arm. This also means any power steering used will not interfere. The lower arm is also designed to except a standard coil spring or coil-over conversion. Sway bar attachments and steering stop pads are also incorporated into the control arm. Stock lower ball joints are used and a bump stop is provided. Two inch drop spindles may also be used with this application.
Note: New hardware for the lower control arm to frame attaching bolts are included.
Upper Control part # ------CTA-57A -- $639.00 pair Lower Control Arms Part # CTA-57L ---- $899.00 pair |
